Look 986 E-Post MTB Frame '11

HM CARBON FIBRE The use of high modulus carbon fibre is the reason why we are able to build light weight frames while maintaining optimal lateral stiffness. This creates excellent frame efficiency and preserves the comfort of the ride. The use of carbon in the construction of MTBs revives designs based on rigid or semi rigid frames, as they provide very significant weight reduction. MONOBLOC / T2T FRAME CONSTRUCTION The front triangle is ‘monobloc’ construction for greater strength and lightness. A frame reinforcing ‘gusset’ is integrated into the down tube under the head tube. This ‘gusset’ also allows for better compatibility with new suspension fork designs. The frame rear triangle is connected to the front main triangle using T2T Technology (‘Tube To Tube’). This technology allows a very simple yet effective connection. DCSC CONCEPT STAYS DUAL COMFORT AND STIFFNESS CONCEPT. The upper and lower sections of the stays are flattened, which provide two benefits: improved flexibility in the vertical plane for greater comfort (vertical compliance) and increased stiffness in the lateral plane for better pedaling transmission. RACE TUNED GEOMETRY The 986’s geometry was designed based on the most up to date 80mm to 100mm suspension fork designs. The 71.2° head tube angle offers a perfect steering response/stability compromise. The seat tube angle is 72.2°, as the frame was designed specifically for the E-POST ‘Reverse 5’. BB30 BOTTOM BRACKET The 986 White / Black for 2011 has a BB30 standard chain drive casing, thus allowing the reduction of the bike’s weight while still improving the transfer of energy in fact exceptional on the 986. Furthermore, the BB30 standard gives access to upper range chain drives double or triple lightweight and specifically dimensioned to take advantage of the qualities of the BB30 standard: reduced jamming and Q-factor. "NANO METAL" PROTECTION The diagonal tube is reinforced with metallic nanoparticles that increase the resistance to impacts by more than 60% without added weight. REVERSE 5 E-POST The seat tube and E-Post seatpost is an integrated system. This design gives the bicycle both greater performance and aesthetic appeal. Three elastomer blocks are used to absorb small impacts and vibrations, as well as fully isolate the seat post from the frame. The elastomer materials allow a slight inflection of the seatpost backwards, which improves cyclist comfort. This reversible E-Post seatpost allows for +/-5mm positioning from the seat tube centre line. The new 360 degree saddle rail clamp system allows for micro adjustability when the E-Post is in either position.