Look Keo 2 Max Carbon Pedals

Large width and pedal surface area For more efficient and more comfortable cycling, Keo 2 Max has a pressing area 12% more important than the Keo carbon. So as to further improve the transmission of the effort and the length of the pedal?s service life, the area is in stainless steel over-moulded in the body of the pedal. Lightweight 122g Once again, with its 122g, Keo 2 Max Carbon is one of the lightest pedals in its category. This is possible thanks to the use of injected carbon. which reduces weight while maintains durability. Maxiumum reliability Special attention was brought to reliability: Injected Carbon body, stainless steel pressing area & oversize axle make this pedal a very secure and durable product. The new special axle profile of the Keo2 Max Carbon maintains our Keo Carbon stack height even while using an oversized steel axle. It is composed of 2 miniature roller bearings (12 mm inside x 18 mm outside) and of a needle bearing. LOOK axes are only validated after a rotation test of1 million cycles at 100 rpm with a load of 90kg on the centre of the pedal and an off-centre rotation (which creates a shock at each rotation). Q-Factor Settings Keo 2 Max axle threads are now 14mm in length. This allows a Q-Factor adjustment of plus 2mm using a specific spacer available as a spare part. It can increase the Q Factor measurement from 53 to 55mm. Keo Grip Cleats * Non-skid cleat * Position memory * Lateral setting: 4 mm; longitudinal setting: 9 mm * 3 float ranges available: 0 degrees black, 4.5 degrees grey, 9 degrees red